Laboratory of microscopy Team

2025

• PETRUSHENKO, S. et al. Autofluorescent Activity of Thermosensitive, Hemostatic, and Wound Healing Biopolymer Hydrogels GELS BASEL: MDPI, 2025, vol. 11, issue 4. P. neuvedeny (17 stran). ISSN: 2310-2861. https://doi.org/10.3390/gels11040301
• PETRUSHENKO, S. et al. Flexible copper iodide photodetector with Schottky contacts and surface plasmon resonance effect induced by silver nanoparticles Physica B: Condensed Matter AMSTERDAM: ELSEVIER, 2025, vol. 717, issue 417872. P. neuvedeny (14 stran). ISSN: 0921-4526. https://www.sciencedirect.com/science/article/pii/S0921452625009895?dgcid=author#ack0010
• KLOCHKO, N. et al. Flexible Neuromorphic Analog Memristor Based on Nanostructured Copper Iodide Film PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE WEINHEIM: WILEY-V C H VERLAG GMBH, 2025 P. neuvedeny (12 stran). ISBN: undefined, ISSN: 1862-6300. https://onlinelibrary.wiley.com/doi/epdf/10.1002/pssa.202500588
• COUFAL, R. et al. Fluorescent Nanoporous Materials from Polypropylene-Based Covalent Adaptable Networks ACS Omega WASHINGTON: AMER CHEMICAL SOC, 2025, vol. 10, issue 14. P. 13954 – 13965. ISSN: 2470-1343. https://doi.org/10.1021/acsomega.4c10168
• SERDYUK, I., PETRUSHENKO, S., STOLBOVYY, V. , and FIJALKOWSKI, M. Investigation of Properties of Multilayer Nitride CrN/NbN Coatings According to Acoustic Emission Parameters. Pt. 1. Multilayer CrN/NbN Coatings with a Double-Layer Thickness of 230 nm Metallofizika i Noveishie Tekhnologii Kiev: G V Kurdyumov Inst Metal Physics Nas Ukraine, 2025, vol. 47, issue 2. P. 199 – 215. ISSN: 1024-1809. https://mfint.imp.kiev.ua/article/v47/i02/MFiNT.47.0199.pdf
• PETRUSHENKO, S. et al. Low-Temperature, Highly Sensitive Ammonia Sensors Based on Nanostructured Copper Iodide Layers Chemosensors Basel: MDPI, 2025, vol. 13, issue 2. P. neuvedeny (21 stranky). ISSN: 2227-9040. https://doi.org/10.3390/chemosensors13020029
• FEDONENKO, D. et al. Nanostructured Copper Iodide Film in a Multifunctional Flexible Device for Ultraviolet Photodetection and Ammonia Monitoring Ukrainian Journal of Physics Kiev: National Academy of Sciences of Ukraine, 2025, vol. 70, issue 6. P. 406 – 421. ISSN: 2071-0186. https://ujp.bitp.kiev.ua/index.php/ujp/article/view/2023580/3313
• PETRUSHENKO, S. et al. Sulfur-Doped Nanostructured Copper Iodide Films for Chemiresistive Ammonia Sensors Analyzing Exhaled Breath Physica Status Solidi (a) WEINHEIM: WILEY-V C H VERLAG GMBH, 2025, vol. 2025, issue 2400966. P. neuvedeny (19 stran). ISSN: 1862-6300. https://onlinelibrary.wiley.com/doi/10.1002/pssa.202400966
• SZINDLER, M. et al. The Use of ZnO Quantum Dots to Improve the Electrical Properties of Silicon Solar Cells Materials BASEL: MDPI, 2025, vol. 18, issue 4. P. neuvedeny (14 stran). ISSN: 1996-1944. https://doi.org/10.3390/ma18040861
• FEDONENKO, D. et al. Ultraviolet Photodetector Based on Nanostructured Copper Iodide Films Deposited by Automatic SILAR Method JOURNAL OF NANO- AND ELECTRONIC PHYSICS SUMY: SUMY STATE UNIV, DEPT MARKETING & MIA, 2025, vol. 17, issue 2. P. neuvedeny (7 stran). ISSN: 2077-6772. https://jnep.sumdu.edu.ua/download/numbers/2025/2/articles/en/jnep_17_2_02025.pdf

2025

• BLATOŇOVÁ, K. Enhancing Biocompatibility of 3D-Printed Polydioxanone Medical Structures: A Comparative Study of Plasma Treatment and Micropatterned Surface Modification IC3DTH – The International Conference on 3D Technologies in Hospitals VÍDEŇ: , 2025 P. neuvedeny (100 strana).
• BLATOŇOVÁ, K. Zvýšení biokompatibility 3D tištěných implantátů z polydioxanonu: Srovnávací studie plazmové úpravy a modifikace povrchu pomocí mikrostruktury Sjezd České společnosti pro 3D tisk v medicíně 2025, 2025 P. neuvedeny (100 strana). ISBN: 9788087339442.

2024

• BLATOŇOVÁ, K. Study of the use of a surgical monofilament made of polydioxanone for 3D printing of absorbable orthopedic implants Book of proceedings: AUTEX 2024 World Conference, 2024pp. ISBN: ISBN: 978-80-7494-705-6, ISSN: ISBN: 978-80-7494-705-6. https://autex2024.tul.cz/_get/abstract/195
• BLATOŇOVÁ, K. The Use of Polydioxanone for 3D Printing of Absorbable Implants and the Effect of Plasma Surface Modification on Their Biocompatible Properties Conference Proceedings - NANOCON 2024, 16th International Conference on Nanomaterials - Research & Application, 2024pp. ISBN: 978-80-88365-20-4, ISSN: 2694-930X. https://nanocon2024.tanger.cz/cz/sbornik-abstraktu/

2022

• ERBEN, J. et al. The Injection Molding of Biodegradable Polydioxanone-A Study of the Dependence of the Structural and Mechanical Properties on Thermal Processing Conditions Polymers BASEL: MDPI AG, 2022, vol. 14, issue 24. P. neuvedeny (15 stran). ISSN: 2073-4360. https://www.mdpi.com/2073-4360/14/24/5528/pdf

2026

• MIKULE, J. et al. BIODEGRADABLE AC ELECTROSPUN NANOFIBROUS YARNS: TECHNOLOGY, MODIFICATIONS, POSTPROCESS TREATMENT AND PROPERTIES FOR SURGICAL SUTURES Conference Proceedings - NANOCON 2025 17th International Conference on Nanomaterials, 2026 P. neuvedeny (6 stran). ISBN: 978-80-88365-29-7, ISSN: 2694-930X.

2025

• ZHANG, X. et al. A Flexible and Breathable Fiber-based Thermocouple with Nanoparticle-based Ni/Cu Junctions advanced materials, 2025 P. neuvedeny (31 stranky). ISSN: 1521-4095.
• SVOBODOVÁ, L. et al. Antibakteriální úprava nylonových filtrů pomocí tenkých kovových vrstev nanesených magnetronovým naprašováním Vodní hospodářství Čkyně: Vodní hospodářství spol. s r. o, 2025 P. 1 – 4. ISSN: 1211-0760. https://www.vodnihospodarstvi.cz/ArchivPDF/vh2025/vh_10-2025.pdf
• HOFMAN, A. et al. Corrosion Resistance of 3D-Printed AISI 316L Stainless Steel in Molten Glass: Microstructural Evolution and Phase Transformations 19th International Symposium on Metallogprahy, Fractography and Materials Science Košice: Technical University of Košice, 2025pp. ISBN: 978-80-553-4818-6. https://konferencie.net/metalo/docs/Abstract%20Booklet_M&F25_web.pdf
• KEJZLAR, P., HOFMAN, A. , and SMUTNÁ, M. Failure Analysis of a Copper Pipe Used for Natural Gas Distribution: Investigation of Crack Formation and Fracture Mechanism 19th International Symposium on Metallogprahy, Fractography and Materials Science Košice: Technical University of Košice, 2025pp. ISBN: 978-80-553-4818-6. https://konferencie.net/metalo/docs/Abstract%20Booklet_M&F25_web.pdf
• KRAFKA, M. et al. Influence of Combined Femtosecond Laser Texturing and DC Pulsed Magnetron Sputtering on the Mechanical and Tribological Properties of Tool Steel, 2025 https://www.anton-paar.com/fileadmin/Landing-pages/msc-seminar/2025/MSC-Seminar-2025_Program.pdf?srsltid=AfmBOoq3tAHmlg7uNM2thp1KI65TjTFh6yp6_7CbuMZ6VWdhn1gBRP_S
• DUCHÁČ, A. , and KEJZLAR, P. Investigation of Al-Si Coating Behavior on 22MnB5 Boron Steel during Heat Treatment 19th International Symposium on Metallogprahy, Fractography and Materials Science Košice: Technical University of Košice, 2025pp. ISBN: 978-80-553-4818-6. https://konferencie.net/metalo/docs/Abstract%20Booklet_M&F25_web.pdf
• KROBOTOVÁ, A. et al. Modification of functional properties of glass fiber filters surfaces using PDV magnetron sputtering 34th INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2025 TANGER Ltd., 2025 P. 333 – 338. ISBN: 978-80-88365-27-3, ISSN: 2694-9296. https://doi.org/10.37904/metal.2025.5129
• BAKALOVA, T. et al. Ověřená technologie výroby trvalého biostimulačního povlaku pro plastové substráty [ověřená technologie]. 2025.
• ZHANG, X. et al. Potential of Fibrous Materials with Nanoparticle-Based Ni/Cu Junctions for Wearable Temperature Sensors ACS Applied Electronic Materials Washington: ACS publications, 2025, vol. 7, issue 17. P. 8053 – 8068. ISSN: 2637-6113. https://pubs.acs.org/doi/abs/10.1021/acsaelm.5c00947

2025

• HOFMAN, A. et al. Corrosion Resistance of 3D-Printed AISI 316L Stainless Steel in Molten Glass: Microstructural Evolution and Phase Transformations 19th International Symposium on Metallogprahy, Fractography and Materials Science Košice: Technical University of Košice, 2025pp. ISBN: 978-80-553-4818-6. https://konferencie.net/metalo/docs/Abstract%20Booklet_M&F25_web.pdf
• KEJZLAR, P., HOFMAN, A. , and SMUTNÁ, M. Failure Analysis of a Copper Pipe Used for Natural Gas Distribution: Investigation of Crack Formation and Fracture Mechanism 19th International Symposium on Metallogprahy, Fractography and Materials Science Košice: Technical University of Košice, 2025pp. ISBN: 978-80-553-4818-6. https://konferencie.net/metalo/docs/Abstract%20Booklet_M&F25_web.pdf

2024

• KEJZLAR, P. et al. Highly Accurate Structural Analysis of Austempered Ductile Iron Using EBSD Technique Material Science Forum Trans Tech Publications Ltd, 2024, vol. 1081, issue 1081. P. 125 – 130. ISSN: 0255-5476. https://www.researchgate.net/profile/Pavel-Kejzlar/publication/369510259_Highly_Accurate_Structural_Analysis_of_Austempered_Ductile_Iron_Using_EBSD_Technique/links/65c3396a34bbff5ba7f0b9ce/Highly-Accurate-Structural-Analysis-of-Austempered-Ductile-Iron-Us
• KEJZLAR, P. et al. Využití difrakce zpětně odražených elektronů pro studium struktury izotermicky kalených litin Jemná mechanika a optika Olomouc: Fyzikální ústav Akademie věd České republiky, v. v. i., 2024 P. 24 – 27. ISSN: 0447-6441.

2023

• KLÍČOVÁ, M. et al. Large-Scale Development of Antibacterial Scaffolds: Gentamicin Sulfate-Loaded Biodegradable Nanofibers for Gastrointestinal Applications ACS Omega WASHINGTON: American Chemical Society (ACS), 2023, vol. 8, issue 43. P. 40823 – 40835. ISSN: 2470-1343. https://pubs.acs.org/doi/full/10.1021/acsomega.3c05924

2021

• MŰLLEROVÁ, S. et al. Biodegradable nanofibrous materials for fortification of gastrointestinal anastomoses NANOCON 2021 - Conference Proceedings, 13th International Conference on Nanomaterials Ostrava: TANGER Ltd., 2021pp. ISBN: 978-80-88365-00-6.
• KEJZLAR, P. , and PETRŽÍLKOVÁ, M. Optimalizace lubrikačních vlastností vosků pro snížení ekologické zátěže a minimalizace tření mezi skluznicí a sněhem [souhrnná výzkumná zpráva].
• KEJZLAR, P. , and PETRŽÍLKOVÁ, M. Vývoj nových inhibičních vrstev proti plísním v interiérech a domácnostech [souhrnná výzkumná zpráva].

2020

• KEJZLAR, P., JAKUBIČKOVÁ, M., PETRŽÍLKOVÁ, M. , and KEJZLAROVÁ, L. The Effect of Nps Addition on the Photocatalytic and Antibacterial Effectivity of Composite TiO2/SiO2 Paint IOP Conference Series: Materials Science and Engineering 1. ed. Bristol: Institute of Physics Publish, 2020 P. neuvedeny (7 stran). ISSN: 1757-8981. https://iopscience.iop.org/article/10.1088/1757-899X/723/1/012010/pdf
• KEJZLAR, P. , and PETRŽÍLKOVÁ, M. Vývoj aktivně-funkčních kompozitních materiálů na různé venkovní fasádní substráty obohacené o vzácné kovy [souhrnná výzkumná zpráva].